 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STD5NM60 STB8NM60 - STP8NM60 N-channel 650 V@Tjmax, 0.9 , 8 A MDmeshTM Power MOSFET TO-220, TO-220FP, D2PAK, DPAK, IPAK Features Type STD5NM60 STD5NM60-1 STB8NM60 STP8NM60 STP8NM60FP VDSS 650 V 650 V 650 V 650 V 650 V RDS(on) <1 <1 <1 <1 <1 ID 5A 5A 5A 8A 8 A(1) Pw 3 96 W 96 W 100 W 100 W 30 W 1 DPAK 3 1 3 TO-220FP DPAK 3 3 1 2 1 2 100% avalanche tested HIgh dv/dt and avalanche capabilities Low input capacitance and gate charge Low gate input resistance Figure 1. TO-220 2 1 IPAK Application Internal schematic diagram Switching applications Description The MDmeshTM is a new revolutionary Power MOSFET technology that associates the multiple drain process with the company's PowerMESHTM horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the company's proprietary strip technique yields overall dynamic performance that is significantly better than that of similar competition's products. Table 1. Device summary Order codes STD5NM60-1 STD5NM60T4 STB8NM60T4 STP8NM60 STP8NM60FP Marking D5NM60 D5NM60 B8NM60 P8NM60 P8NM60FP Package IPAK DPAK DPAK TO-220 TO-220FP Packaging Tube Tape & reel Tape & reel Tube Tube October 2008 Rev 17 1/18 www.st.com 18 Electrical ratings STP8NM60, STD5NM60, STB8NM60 1 Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter TO-220 DPAK VGS ID ID IDM(2) PTOT dv/dt(3) VISO TJ Tstg Gate-source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC=100 C Drain current (pulsed) Total dissipation at TC = 25 C Derating factor Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 C) Operating junction temperature Storage temperature -8 5 32 100 0.8 TO-220FP 30 8(1) 5 (1) 32 (1) 30 0.24 15 2500 -5 3.1 (1) 20 (1) 96 0.0.4 IPAK DPAK V A A A W W/C V/ns V Unit -55 to 150 C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 5 A, di/dt 400 A/s, VDD = 80%V(BR)DSS Table 2. Thermal resistance Value Symbol Parameter TO-220 DPAK IPAK DPAK 1.3 62.5 300 Unit TO-220FP 4.16 C/W C/W C Rthj-case Rthj-a Tl Thermal resistance junction-case max Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose 1.25 Table 3. Symbol IAS EAS Avalanche data Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25 C, ID=IAS, VDD=50 V) Value 2.5 200 Unit A mJ 2/18 STP8NM60, STD5NM60, STB8NM60 Electrical characteristics 2 Electrical characteristics (TCASE = 25 C unless otherwise specified) Table 4. Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) On/off states Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250 A, VGS= 0 VDS = max rating, VDS = max rating @125 C VGS = 20 V VDS = VGS, ID = 250 A VGS= 10 V, ID= 2.5 A 3 4 0.9 Min. 600 1 10 100 Typ. Max. Unit V A A nA V 5 1 Table 5. Symbol gfs Ciss Coss Crss Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Test conditions VDS = ID(on) x RDS(on)max, ID = 2.5 A VDS = 25 V, f=1 MHz, VGS=0 Min. Typ. 2.4 400 100 10 50 13 5 6 18 Max. Unit S pF pF pF pF nC nC nC Coss eq(1). Equivalent output capacitance Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VGS=0, VDS =0 to 480 V VDD= 400 V, ID = 5 A VGS =10 V (see Figure 12) 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 3/18 Electrical characteristics STP8NM60, STD5NM60, STB8NM60 Table 6. Symbol td(on) tr td(off) tf tr(Voff) tf tc Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Off-voltage rise time Fall time Cross-over time Test conditions VDD= 300 V, ID= 2.5 A, RG= 4.7 , VGS=10 V (see Figure 17) Min. Typ. 14 10 23 10 7 10 17 Max. Unit ns ns ns ns ns ns ns VDD= 480 V, ID= 5 A, RG= 4.7 , VGS=10 V Table 7. Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM trr Qrr IRRM Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 5A, VGS=0 ISD = 5 A, VDD=100 V di/dt = 100 A/s, (see Figure 22) ISD = 5 A, VDD = 100 V di/dt = 100 A/s, Tj=150 C (see Figure 22) 300 1.95 13 445 3.00 13.5 Test conditions Min. Typ. Max. 8 32 1.5 Unit A A V ns C A ns C A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5% 4/18 STP8NM60, STD5NM60, STB8NM60 Electrical characteristics 2.1 Figure 2. Electrical characteristics (curves) Safe operating area for TO-220/ DPAK Figure 3. Thermal impedance for TO-220/ DPAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for DPAK/IPAK Figure 7. Thermal impedance for DPAK/IPAK 5/18 Electrical characteristics Figure 8. Output characteristics Figure 9. STP8NM60, STD5NM60, STB8NM60 Transfer characteristics Figure 10. Transconductance Figure 11. Static drain-source on resistance Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations 6/18 STP8NM60, STD5NM60, STB8NM60 Figure 14. Normalized gate threshold voltage vs temperature Electrical characteristics Figure 15. Normalized on resistance vs temperature Figure 16. Source-drain diode forward characteristics 7/18 Test circuit STP8NM60, STD5NM60, STB8NM60 3 Test circuit Figure 18. Gate charge test circuit Figure 17. Switching times test circuit for resistive load Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test switching and diode recovery times circuit Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform 8/18 STP8NM60, STD5NM60, STB8NM60 Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/18 Package mechanical data STP8NM60, STD5NM60, STB8NM60 TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 10/18 STP8NM60, STD5NM60, STB8NM60 Package mechanical data TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 G 11/18 Package mechanical data STP8NM60, STD5NM60, STB8NM60 DPAK (TO-263) mechanical data mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8 0079457_M 12/18 STP8NM60, STD5NM60, STB8NM60 Package mechanical data TO-251 (IPAK) mechanical data mm. DIM. A A1 b b2 b4 c c2 D E e e1 H L (L1) L2 V1 9.00 0.80 0.80 10 o 4.40 16.10 9.40 1.20 5.20 0.45 0.48 6.00 6.40 2.28 4.60 min. 2.20 0.90 0.64 typ max. 2.40 1.10 0.90 0.95 5.40 0.60 0.60 6.20 6.60 0068771_H 13/18 Package mechanical data STP8NM60, STD5NM60, STB8NM60 TO-252 (DPAK) mechanical data DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4.70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 typ max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 0068772_G 14/18 STP8NM60, STD5NM60, STB8NM60 Packaging mechanical data 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 15/18 Packaging mechanical data STP8NM60, STD5NM60, STB8NM60 DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R W BASE QTY 2500 mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40 15.7 16.3 inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574 0.618 0.641 MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1 16/18 STP8NM60, STD5NM60, STB8NM60 Revision history 6 Revision history Table 8. Date 14-Apr-2004 11-Apr-2005 21-Feb-2006 08-Sep-2006 14-Sep-2006 09-Jul-2007 01-Oct-2008 Document revision history Revision 11 12 13 14 15 16 17 Title changed Inserted DPAK New template Modified order codes Corrected Figure 6.: Safe operating area for DPAK/IPAK Qrr value in Table 7.: Source drain diode has been updated 4: Package mechanical data updated Changes 17/18 STP8NM60, STD5NM60, STB8NM60 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18 |
Price & Availability of STD5NM6008
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |